Weighted Pull-Ups: When to Start and How to Progress
When to start weighted pull-ups, what 25 guides say about first load and step size, what the research shows, and a 3 × 5 to 3 × 8 progression.
Weighted pull-ups are strict pull-ups done with added weight, most often plates on a chain from a belt around your hips. On this site you start once you can do 3 sets of 8 L-sit pull-ups; in the 25 guides we read, the most common minimum is 8 bodyweight pull-ups. Start light: 5 lb (2.5 kg) first, and no more than 10% of your bodyweight in the first session. Work from 3 sets of 5 to 3 sets of 8 at that load, then add 5 lb and drop back to 3 × 5. Do it twice a week, from a dead hang to chin over the bar, with no kip.
It is the last rung of the pull ladder. The rungs before it change your leverage. This one adds plates instead.
Key takeaways
- Start adding weight once you can do 3 × 8 L-sit pull-ups. In the 25 guides we read, 8 strict bodyweight pull-ups is the most common minimum, and the lowest numbers they name range from 5 to 12.
- First load: 5 lb (2.5 kg), and never more than 10% of your bodyweight in the first session.
- Build from 3 × 5 to 3 × 8 at one load, then add 5 lb and go back to 3 × 5.
- Train weighted pull-ups twice a week with about 3 minutes of rest between sets. 13 of the 14 guides that give a frequency include twice a week.
- No study we found tests when to start or how much to add, so these are coaching rules, not tested ones.
When you are ready
The pull ladder runs dead hang, inverted row, negative pull-up, pull-up, L-sit pull-up, weighted pull-up. The rule for every rung is the same: move up at 3 sets of 8, no kipping. So you start adding weight once you can do 3 × 8 L-sit pull-ups, with your legs held out in front and every rep starting from straight arms.
Most guides use a plain pull-up count instead (see the next section). The L-sit rung is there for a reason. A plate hanging from your hips tries to swing you and pull your legs into the rep. Holding your legs still in an L, set after set, helps you stop that swing. If you reached 3 × 8 strict pull-ups and skipped the L-sit rung, go back to it first. If you already have 10 or 12 strict pull-ups, you don’t start over: work up to 3 × 8 L-sit pull-ups, then add the plate.
You also need a bar rated for your bodyweight plus the load, a box to step on and off, and pain-free elbows and shoulders. If the inside of your elbow or the front of your shoulder already aches on bodyweight pull-ups, don’t add weight yet.
What 25 weighted pull-up guides say, and where they disagree
We read 25 weighted pull-up guides from Google US results and related web searches, and noted what each one says about when to start, the first load, how much to add and how often to train.
| Question | What the 25 guides say |
|---|---|
| How many bodyweight pull-ups first? | 19 give a number. The lowest number they name runs from 5 to 12 strict reps; 8 is the most common (8 guides) and the median. 6 say exactly 8 to 10. 2 set a lower bar for strength (5 to 6) than for muscle (10 to 12), and 1 says 8 for men, 5 for women. 1 says no single number works, and 5 give none |
| One set or several? | Of the 19, 4 ask for the reps across several sets, not in one set |
| First load | 14 give a number. 7 of the 8 that use plate weight say 5 to 10 lb (2.5 to 5 kg). Of the 6 that use bodyweight, 4 say 5% or 5 to 10%. 11 give no number |
| How much to add each time | 14 give a step size; 13 of them top out at 2.5 kg (about 5 lb) or less. The largest is 2 to 3 kg every 3 to 4 weeks |
| Sessions per week | 14 give a number; 13 of their ranges include twice a week, and none go above 3 |
| Deload or lighter week | 6 mention one |
How we got this: on 5 November 2026 we took the article results for “weighted pull ups”, “weighted pull up progression” and “how to do weighted pull ups” from Google US, plus pages from six related web searches, and listed 42 URLs. Seven sites, including Muscle & Strength, MasterClass and Fitbod, block scripts like ours in their robots.txt file, so we didn’t fetch them. Two pages failed to load. We kept one page per site (one store had seven), and dropped a stub and a page on specialty variations. That left 25. One person coded each page by hand from its text. This is one day’s snapshot of US results, and these guides are coaching advice, not tested evidence. The data, scripts and coding notes are kept with our records.
The guides agree on small first loads, small steps and two sessions a week. They disagree on when to start: the lowest numbers range from 5 to 12 reps, and we found no study that tests when to start. The ladder sets its own bar, 3 × 8 L-sit pull-ups, and that’s the one we use.
How to do a weighted pull-up
- Load the belt. Thread the chain through the plate and clip it back, so the plate hangs at about mid-thigh. Wear the belt low on your hips.
- Step up, don’t jump. Set a box just behind the bar so your legs hang free once you step off. Stand on it, grip the bar overhand about shoulder width apart, and step off so you hang still.
- Set the hang. Arms straight, shoulders pulled down away from your ears, legs together and slightly in front. Squeeze your glutes so the plate doesn’t swing.
- Pull. Drive your elbows down toward your ribs until your chin clears the bar.
- Lower under control, taking about 2 seconds, all the way to straight arms.
- Step down onto the box at the end of the set. Don’t drop with the plate on.
A rep counts when it starts from straight arms, the chin clears the bar, and the legs don’t kick or swing. A rep that stops short at the top or bottom is a miss. End the set there and log the honest count. Stop a set when the next rep would break form, not when you grind to a halt.
Belt, vest or dumbbell
| Method | Good for | Watch out for |
|---|---|---|
| Dip belt with plates | Most people, any load; steps as small as your smallest plate | Plate swing if your legs move |
| Weighted vest | Small loads; feels closest to a normal pull-up | Limited by how heavy the vest goes; some only adjust in big steps |
| Dumbbell between the feet or ankles | No belt yet, light loads | Hard to hold still; the dumbbell slipping ends the set |
Common mistakes
- Jumping 10 lb at a time. A 10 lb plate on a 180 lb lifter adds more than 5% to the weight the arms lift. Use 5 lb steps, or 2.5 lb steps if you have the plates.
- Short reps to “make” the load. If you can only hit the reps by stopping above straight arms or below the bar, the plate is too heavy.
- Testing a max every session. Max sets show where you are; the sets of 5 to 8 below are what move it.
- Ignoring bodyweight. Gain 5 lb of bodyweight and the same plate is a heavier set. Log your bodyweight next to the load.
What the research shows
Adding weight to pull-ups is common advice, but most guides skip how strong the evidence is. Here is what we found.
Bodyweight is already a heavy load for many people. In a 2009 study of 35 college men, their heaviest single pull-up averaged 1.16 times their body mass. So bodyweight alone was roughly 86% of their max. At 80% of that max, which is less than bodyweight on average, they managed about 8 reps. For people like them, even a small plate is a noticeable change in effort.
Heavier loads build more max strength. A 2017 meta-analysis pooled 21 studies where every set went to failure. Loads above 60% of a person’s one-rep max gave bigger gains in one-rep max strength than lighter loads. Muscle growth was similar across loads. Put the two studies together: a pull-up starts out as a heavy lift, but as your strict reps climb, your bodyweight becomes a smaller share of your max, and plates are how you keep the load heavy. These studies can’t tell you where that point is for you. Long sets of plain pull-ups still build muscle if you push them hard.
Weighted sets didn’t beat plain pull-ups in the one trial we found. In a 12-week trial presented at the American College of Sports Medicine’s 2017 meeting, healthy adults recruited online trained twice a week with 5 sets to failure. One group did regular pull-ups, one added 10% of bodyweight, and one did 6-second negatives (our negative pull-up guide covers that group). All three training groups improved over the 12 weeks, and none improved more than the others. It is a conference abstract with only 7 people left in the weighted group after heavy dropout, so it can’t rule a difference in or out.
Rest longer between heavy sets. In an 8-week study of 21 trained men doing squats, bench press and other lifts, 3 minutes of rest between sets gave more strength and more thigh muscle than 1 minute. It didn’t test pull-ups, but it is why we give weighted sets about 3 minutes of rest instead of the 90 seconds the pull block gets in the 30-minute session.
The gap: we found no study that tests when to start adding weight, how big the first plate should be, or whether weighted pull-ups protect or strain the elbows. The rules below are coaching rules that match what the guides agree on, not tested ones.
The weighted pull-up progression
The pull ladder’s rule is 3 sets of 8, no kipping. On this rung, 3 × 8 isn’t where you leave. It’s the signal to add weight. The whole progression is one table, checked once a week.
Your first session. Warm up with 5 bodyweight pull-ups. Then do a set of 5 with a 5 lb (2.5 kg) plate, resting about 3 minutes after every set. If the set left 3 or more clean reps in the tank, add 5 lb and do another set of 5. Stop adding when a set leaves 2 reps or fewer, or when the next plate would take you past 10% of your bodyweight (for a 130 lb lifter, that’s 13 lb, so stop at 10 lb). If a set falls short of 5 clean reps, stop: the load before it is yours. That load is your working load. Finish with 2 sets of 5 at it. If you can’t get 5 clean reps with 5 lb, stay on L-sit pull-ups for two more weeks and try again.
Every session after that: one ramp-up set of 3 reps at about half your working load (or bodyweight), then 3 working sets with about 3 minutes of rest. Do weighted pull-ups twice a week, on Tuesday and Friday.
At the end of each week, look at the working sets from the sessions you did and find your row. A set hits its target only if every rep is clean. If you did no weighted session that week, repeat it.
| This week | Next week |
|---|---|
| Every set hit its target, below 8 reps | Same load, one more rep per set |
| Every set hit 8 reps | Add 5 lb, back to 3 × 5 |
| A set fell short | Repeat the week |
| A set fell short in a week you were already repeating | Take 5 lb off, 3 × 5 |
If taking weight off would leave no plate on the belt, go back to L-sit pull-ups for two weeks, then run the first session again. If you own 2.5 lb (1.25 kg) plates, you can add and take off 2.5 lb instead of 5 lb in every row; smaller jumps are easier to absorb as the load climbs.
Test weeks: the plans retest the four-rep test every four weeks on the same day of the week. While you’re on this rung, make that day Tuesday, so the test replaces Tuesday’s weighted session. Friday is a normal session with 2 working sets instead of 3, and the table judges the week on Friday alone.
Here is the path for a 180 lb lifter whose first session ends at 10 lb, if every week goes to plan:
| Week | Load | Working sets |
|---|---|---|
| 1 | +10 lb | Session 1: find the load, then 2 × 5. Session 2: 3 × 5 |
| 2 | +10 lb | 3 × 6 |
| 3 | +10 lb | 3 × 7 |
| 4 (test week) | +10 lb | Tuesday: test. Friday: 2 × 8 |
| 5 | +15 lb | 3 × 5 |
| 6 | +15 lb | 3 × 6 |
| 7 | +15 lb | 3 × 7 |
| 8 (test week) | +15 lb | Tuesday: test. Friday: 2 × 8 |
Most weeks won’t go to plan, and that’s fine. The table decides, not the calendar. Expect the reps to come more slowly as the load climbs.
Where this fits in the plans
The weighted pull-up belongs in the Ladder plan, which runs four 45-minute sessions a week and is for people with 25+ push-ups and 5+ strict pull-ups. Every plan uses the same session skeleton, so each session has a pull block:
- Tuesday (pull) and Friday (full body): the weighted sets are the pull block. The ramp-up set plus 3 working sets make the block’s four sets, with about 3 minutes of rest instead of 90 seconds. That stretches the block from 8 minutes to about 12, which the Ladder plan’s 45-minute sessions have room for.
- Monday and Thursday: keep the pull block easy. Do 4 sets of inverted rows or bodyweight pull-ups, each stopped at least two reps short of failure. Heavy weighted sets tire your grip and elbows, and Tuesday and Friday count on them.
As you get stronger, the standards table still measures bodyweight reps. The intermediate mark is 10 strict pull-ups and advanced is 20+. The four-rep test tracks that number while the plates do the work.
If your elbows or shoulders complain
If your elbow or the front of your shoulder starts to hurt, take 5 lb off and stay at 3 × 5 there, adding no reps or load, until the pain is gone. Then carry on with the table. If you only have 5 lb on, take it off and do L-sit pull-ups instead. If the pain lasts more than a couple of weeks, or hurts at rest, stop the weighted sets and get it checked. Don’t train through it to keep the numbers going up.
Frequently asked questions
How many pull-ups should you do before weighted pull-ups?
There is no tested number. Of the 25 guides we read, 19 give one, and their lowest number ranges from 5 to 12 strict reps, with 8 the most common. On this site the weighted pull-up comes after the L-sit pull-up, so you start once you can do 3 sets of 8 L-sit pull-ups with no kipping.
How much weight should you start with on weighted pull-ups?
Start with 5 lb (2.5 kg). In your first session, add 5 lb at a time until a set of 5 leaves 2 reps or fewer in the tank, and never go past 10% of your bodyweight even if it still feels light. Most of the guides we read that give a number say 5 to 10 lb, or 5 to 10% of bodyweight.
How often should you do weighted pull-ups?
Twice a week. Of the 14 guides we read that give a number, 13 include twice a week in their range and none go above three. In the Ladder plan, use the Tuesday pull session and the Friday full-body session.
Do weighted pull-ups increase your bodyweight pull-up reps?
They can, but no faster than regular pull-ups in the one trial we found. In a small 12-week study of healthy adults, sets with 10% of bodyweight added raised pull-up scores about as much as plain pull-ups or slow negatives. The weighted group had only 7 people, so treat that as a hint.
Is a dip belt or a weighted vest better for pull-ups?
A dip belt is the usual choice once you are adding real weight, because you can load it in small steps and it usually holds more than a vest. A vest is fine for small loads and feels closer to a normal pull-up. We found no study comparing the two.
Sources
- Schoenfeld et al., Strength and hypertrophy adaptations between low- vs. high-load resistance training: a systematic review and meta-analysis, Journal of Strength and Conditioning Research, 2017
- Johnson et al., Relationship of lat-pull repetitions and pull-ups to maximal lat-pull and pull-up strength in men and women, Journal of Strength and Conditioning Research, 2009
- Effects of different pull up training strategies on pull up scores, Medicine & Science in Sports & Exercise 49(5S), 2017 (ACSM conference abstract)
- Mountain Tactical Institute, Study results: no easy answer on pull-up improvement (summary of the same study)
- Schoenfeld et al., Longer interset rest periods enhance muscle strength and hypertrophy in resistance-trained men, Journal of Strength and Conditioning Research, 2016

